Gripping type anchor clamp - Complete the Pink Boxes then click submit        
Basic data:   Pipe / Tube OD (MM)    
Material Finish
  Hole Diameter (E mm)    
 Quantity Required 
Material Width (W) mm
 Do you require material test cert? 
Material Thickness (T) mm
Calculated  Data & Costs:
 Inside Diameter (D )mm 
Clamp Code:
 OR 
 Overhead Costs 
 Calculated D 
 Setting Cost 
  Cost if < 49 Required  
Inside Height ( C )
  Cost if 50>79 Required (10%)  
 OR  
  Cost if 80>99 Required (15%)       Calculated C    Graphskill SUMS=CLAMP/MATL/D-W*T-C-A-B-E-R  
  Cost if 99>199 Required (20%)  
EG:CLAMP/T304/64-40*8-63-140-30-14-6
  Cost if 200>999 Required (25%)  
 R (radius of bend) 
1 > Please click the Submit button to send the data to Graphskill.
We will check the figures and dimensions for suitability and then contact you for approval
There is no commitment at this stage

2 > Calculated costs are provisional. Some variations of sizes could require adjustment

3 > Self colour and stainless steel 3-5 days, BZP and Galvansied approx 2 weeks (But we may find stock item close enough for your needs)

4 > Not all combinations of material width and thickness will be available. We will contact you
  Cost if 1000> Required (40%)  
 OR  
       Calculated R (half T rounded up)     
Your Name
Telephone
Centers (A) mm
Delivery Post Code if UK, else Country
Contact Email
 Calculated A 
Please Enter further details here
Center of hole to end (B) mm
 OR  
 Calculated B 
Calculated Dimensions
D
C
r
A
B
Pipe / Tube OD (MM)
Hole Diameter (e mm)
Material Width (W) mm
Material Thickness (T) mm
Weight
Base Cost
Clamp Code
 
R
 
Graphskill SUMS=CLAMP/MATL/D-W*T-C-A-B-E
EG:CLAMP/T304/64-40*8-63-140-30-14