Do you have a pipe dream? We will support you !

The future is here – the future is blue! The brand new, patent pending, low friction u-bolts. The 1111 series.

The future is here – the future is blue! The brand new, patent pending, low friction u-bolts

Our first line of U-bolts with a rubber shroud were the ever popular 1108 series. A basic rubber sleeve and pad added to the U-bolt to act as an insulator

1108 Series Rubber insulated U-bolts

1108 Series Rubber insulated U-bolts

These U-bolts are ideally suited to insulating the metal of the pipe / tube from the U-bolt. Perhaps they are dissimilar metals, and you need to prevent any enhanced corrosion problems.

These are not classed as either grip or non-grip and could be used in both situations depending on placement of nuts, or trimming the rubber slightly

You can see our range of insulating rubber lined u-bolts on our website : Click Here


Our next foray into rubber encased U-bolts was the heavy duty anti-vibration U-bolts

1109 Series heavy Duty anti-vibration U-bolt

1109 Series heavy Duty anti-vibration U-bolt

These are very definitely grip type u-bolts. Designed to grip the pipe / tube but also to absorb any vibration that may be coming from the pipe. With these U-bolts the rubber is moulded onto the u-bolt and is therefore fixed in postition

But we have the anti-vibration u-bolt in another exiting flavour – the light duty style with  flame retardant rubber.

These U-bolts have a d-shaped cross section, with channels designed to absorb small vibrations

You can see our range of heavy and light duty anti-vibration rubber lined u-bolts on our website : Click Here

 


So with insulating and anti-vibration u-bolts, what else is there?

 

Introducing our brand new, patent pending, low friction, non grip, anti-vibration u-bolts. 

Graphskill’s new Series 1111 Ubolts

 

These ubolts have been developed to enable pipes to be securely guided with a minimum of friction so safe-guarding the pipe from expansion & contraction wear due to temperature changes; whilst also reducing the noise & vibration of the pipe.

They are fitted with a gap between the ubolt and the pipe enabling the pipe to expand & contract yet keeping it fully guided in position.

The rubber base pad acts to reduce the noise & vibration of the pipes as they carry their fluid and it is fitted with a PTFE strip to reduce the friction and hence protects the pipe as it expands & contracts. The pad also contains a metal spacer for the U-bolt legs to go through giving strength to the pad, and a firm anchor for fastening the nuts at the required position.

The patented-pending ubolt sleeve is a low friction silicone rubber which rotates around the ubolt to enable the pipe to move unrestricted but be fully guided in position on the supporting framework.

These are a much cheaper and more reliable solution to the conventional rubber lined ubolts which have PTFE bonded to the inside surface of the rubber coated ubolt.

Although Ubolts with the PTFE strip bonded to the rubber profile around the ubolts have been in common use for many years, they are prone to the PTFE separating from the rubber due to the difference in the expansion coefficient of the rubber and the PTFE. This problem is eliminated by Graphskill’s unique solution of a single medium with minimal friction.


YOU CAN SEE OUR FULL RANGE OF THE EXITING NEW PRODUCTS ON OUR ON-LINE STORE: CLICK HERE

%d bloggers like this: